Well Key GS Pulling Tool 1920X1080
Well Key GS Pulling Tool 1920X1080

Well Key® 

GS Pulling Tool

For fishing operations

Introduction

The Well Key® GS Pulling Tool is based on the Welltec‘s existing Well Key design. This tool is used for pulling plugs and fishing operations.

It is activated to latch on to a fish neck mechanically. Instead of the key pads of the standard Well Key, a GS (which is essentially a fishing spear) will be active.

 

Case highlight

During well intervention operation, as part of a campaign covering reservoir analysis and surveys, a client installed a 4-1/2” retrievable bridge plug above a set of downhole gauges.

Read case

Overview

The Well Key GS Pulling Tool is activated to latch on to a fish neck mechanically. Instead of the key pads of the standard Well Key, a GS (which is essentially a fishing spear) will be active.

It is capable of latching when powered on and de-activated, i.e. releasing when powered off. This tool is reinforced to withstand high tensile force that can be required during fishing operations.

Well Key GS Pulling Tool hori

Applications

  • Fishing operations
  • Pulling plugs
  • Pulling packers

Features

  • Allows transfer of high, controllable force
  • Passive fail-safe system
  • Rugged design allows for multiple repeated actuations
  • Bi-directional in same run
  • Ability to control position via surface read-out
  • Wide range of sizes
  • Universal
  • NACE compliant

Benefits

  • Force applied directly to target
  • Fewer runs
  • No jarring required
  • Large range of ID’s accessible
  • Accurate depth control
  • Reduced risk of damage to well hardware
  • Operates on any e-line via DC

Specification range*

Tool OD 3 1/8
Length 13 ft 14 ft
Weight in air 210 lbs 216 lbs
OD range of GS heads 3.34” 5.55”
Latch ID 2.52” 4.9”
Max. well pressure 25,000 psi
Max. well temperature 302°F
Safe pull tensile strength 66,000 lbs
Compressive strength 75,000 lbs
* Dependent upon configuration