Case highlight
A water injection well was undergoing a start-up procedure when a build-up in wellhead pressure was observed indicating a possible blockage by a hydrate...
Well Miller® RCB
Reverse Circulating Bit
The Well Miller RCB (Reverse Circulating Bit) integrates both a rotary bit with a suction system to provide the combined benefits of both in one powerful tool.
This design breaks through obstacles, such as composite plugs, and recovers the generated cuttings with suction into the integrated bailers. In one and the same run you can mill such obstacles as composite plugs and remove them from the well to prevent further associated problems.
A water injection well was undergoing a start-up procedure when a build-up in wellhead pressure was observed indicating a possible blockage by a hydrate...
The Well Miller RCB (Reverse Circulating Bit) incorporates both a rotary system and a suction system that are combined for maximum efficiency.
This design breaks down hard debris and recovers the cuttings to the surface in the same run. Alternately a nozzle brush can be used instead of a bit to remove hard deposits from the walls of the tubular and retrieve them simultaneously.
Tool OD | 2 1/8” 3 1/8” |
---|---|
Length | 26.7 ft 28.9 ft |
Weight in air | 200 lbs 249 lbs |
Bit sizes | 2.35" 7.0” |
Available bailer sizes | 2.125” 3.125” |
Volume / three bailer | 1.08 gals 3.4 gals |
Max. well pressure | 20,000 psi 25,000 psi |
Max. well temperature | 302°F 338°F |
Tensile strength | 24,000 lbs 42,000 lbs |
Compressive strength | 29,000 lbs 50,000 lbs |
* | Dependent upon configuration |